JZ881 Micro Power Data RF Module Price buy introduction Info|Components-Wireless-module

JZ881, the Micro-power wireless transceiver data module is used as the wireless data transceiver in short distance, with the small size, weight and power consumption and good stability and reliability.
 * AMR Automatic Meter Reading
 * Wireless alarm and security systems
 * Home automation
 * Low power telemetry
 * Wireless conference voting system;
 * Sports training & competition;
 * Wireless dishes ordering;
 * Wireless POS, PDA wireless smart terminal;
 * Electronic bus station and intelligent traffic;
 * RF transmitter Wireless electronic display screen and queuing machine;
 * Wireless telemetry Charging for parking, parking lot;
 * Wireless modem Automobile inspection and four-wheel orientation;
 * Wireless sensor Industrial wireless remote control and air conditioning remote controller;
 * Observation and predication of oil well and hydrological information;

Technical specification of JZ881:

Serial number	Item	Parameter	Note
1	Modulation mode	FSK
2	Work frequency	490MHZ	160/230/315mhz is possible
3	Transmission power	<10mW
4	Transmitting current	<40mA
5	Receiving current	<35mA
6.	Sleeping current	<10uA
7	Receiving sensitivity	-120dbm(1200bps)
8	Channel amount	8 channels	User setting
9	Working temperature	-20℃～+85℃	°C
10	Working humidity	10%~90%(relative humidity without condensation)
11	Antenna impedance:	50
12	Power supply	+5V
13	Dimension	39.4mm×24mm×8mm
14	Interface	TTL
15	Reliable transmit distance	500m

Feature of JZ881 Middle Power Data RF Module:

1.Power and receiving sensitivity
The transmission power is <10mW, Receiving sensitivity: -120dbm,
Transmitting current<40mA, Receiving current<35mA, sleeping current <10uA.
2. Modulation mode and Frequency 
Modulation mode: FSK, Frequency: 490mhz. Also capable of 160/230/315MHz.
3. High anti- interference and low BER(Bit error Rate)
Based on the FSK modulation mode, it adopts the efficient communication protocol. The actual bit error rate of 10-5 ~ 10-6 can be achieved when channel bit error rate is 10-2.
4. Long transmission distance
Within the range of visibility, the reliable distance is (BER=10-3/1200bps)>500m, (BER=10-3/1200bps)>800m when the antenna height is greater than 2m .
5. Transparent data transmission
Transparent data interface is offered to suit any standard or nonstandard user protocol. Any false data generated in the air can be filtrated automatically (What has been received is exactly what has been transmitted). The change time between receiving and sending is <10ms.
6. Multi- channel
The standard JZ881 configuration provides 8 channels to meet the multiple communication combination mode of the user.
7. High speed wireless communication and Large data buffer zone
    When the RF baudrate is bigger than COM baudrate, allowing to transmit unlimited length data at one time, when the RF baudrate is smaller or equal to the COM’s, allowing the transmission of 255 Bytes data.
8. Intelligent data control and the user doesn’t need to prepare excessive programs
Even for semi duplex communication, the user doesn’t need to prepare excessive programs, only receiving/transmitting the data from the interface. JZ881 will complete the other operations automatically, such as transmission/receiving conversion in the air, control, etc.
9. High reliability, small and light
Single chip radio - frequency integrated circuit and single chip MCU are used for lessened peripheral circuits, high reliability, and low failure rate.
10. Watchdog monitor
Watchdog monitors the inner function, so it can change the traditional product structure and also improve the reliability of our modules.