Easy5509 DSP devlopment kit TMS320VC5509A Evaluation Board Price buy introduction Info|Study-Dev-DSP-board-emulator

1.1 Easy5509 DSP Evaluation Board introduce

Easy5509 is an Evaluation Board based on TMS320VC5509A DSP for second development or study. It supply more than 30 examples, and the full schematic diagram and the common surrounding interface are available in the CD.
It is a low price STARTER KIT TMS320VC5509A DSP for person, company, university and research institute study and development.

1.2 Easy5509 system resource

• DSP chip TMS320VC5509A,16 bit data bus, up to 200M speed
• 128K × 16-Bit On-Chip RAM, Composed of
• 64K Bytes of Dual-Access RAM (DARAM) 8 Blocks of 4K × 16-Bit
• 192K Bytes of Single-Access RAM (SARAM) 24 Blocks of 4K × 16-Bit
• 64K Bytes of One-Wait-State On-Chip ROM (32K × 16-Bit)
• Extend 4M*16-Bit SDRAM, HY57V641620；
• Extend 512Kb EEPROM, AT25F1024N,can run user program by SPI boot loader
• CPLD EPM240T100C5, Download interface available
• RTC Real time clock
• 1 Seven-Segment display
• 8 LEDS
• 8 single keys
• 1 buzzer
• 1 reset chip MAX706R and button
• 1 RS-232 interface
• 2 channels 10 bit AD input
• Support SD card
• Support USB2.0 Full Speed interface
• Double channel speaker output, Headphone output
• MIC and LINEIN input
• 12864 LCM and 1602 LCD interface
• 5 channels interrupt input
• DMA EHPI Mcbsp data bus etc 120pin IO output
• +5V、3.3V、3.3VA、1.8V、GND、GNDF test point
• Directly by external power supply voltage not by USB, more stable and reliable
• PCB size: 13.5*11cm

1.3 Easy5509 Expand interface

1. DSP DMA EHPI and Mcbsp all function pins out, four 30 pin interface, Tube foot spacing 2.54mm
2. IEEE1149.1 standard IDC14 DSP JTAG interface, spacing 2.54mm
3. 12864 LCM 20p and 1602 LCD 16p 2.54mm
4. CPLD IDC10 JTAG interface for user program
5. 1 RS-232 standard DB9 female, and 1 RS-232 SIP3
6. 1 USB DEVICEB
7. 1 audio loudspeaker T
8. 1 audio headphone output interface
9. 1 MIC input
10. 1 LINEIN input
11. DC 5V power adapter interface

1.4 Easy5509 demo code and examples

All soft demos are based on CCS3.3, CPLD demo code is VHDL based on QuartusII6.0。

Basic examples

• Test 1．XF control experiment
• Test 2．Timer experiment
• Test 3．RTC experiment
• Test 4．Experiment interrupt
• Test 5．GPIO control
• Test 6．Watch dog
• Test 7．AD experiment
• Test 8．USB interface experiment
• Test 9．SPI boot loader
• Test 10．Audio Codec
• Test 11．1602 LCD display
• Test 12．12864 LCM display
• Test 13．SD card read and write
• Test 14．SDRAM read and write
• Test 15．USB program
• Test 16．LED control
• Test 17．RS232 communicate
• Test 18．7-segment display
• Test 19．Key board
• Test 20．Buzzer experiment

Arithmetic experiment

• Test 21．Reverse experiment
• Test 22．Enhance experiment
• Test 23．FFT experiment
• Test 24．FIR experiment
• Test 25．FIRLMS experiment
• Test 26．IIR experiment

BIOS experiment

• Test 50．CLK experiment
• Test 51．HELLO experiment
• Test 52．Mailbox experiment
• Test 53．Mutex experiment
• Test 54．queue experiment
• Test 55．semaphore experiment
• Test 56．swi experiment
• Test 57．task experiment

Extend experiment

• Test 27．Audio input and output
• Test 28．CPLD Program

1.5 DSP board documents

• 1. Protel99 DXP and PDF format schematic diagram
• 2．Demo code with notes
• 3．Online EEPROM program tool and document
• 4．Datasheets for 5509 DSP, include Applications Notes，CCS，dsplib_2.40.00 etc
• 5．Development documents for DSP, such as  CCS course, TMS320VC5509A USB documents
• 6．All chip datasheet on board
• 7．TIDSP IDE CCS3.3；
• 8．Quartus－II6.0 soft
• 9．Acrobatreader KeilC BushoundUSB Sscom
• 10．Altera program tool schematic
• 11．Type head soft for LCD
• 12．TCP/IP USB CAN2.0 FAT16 FAT32 documents
• 16．Full series of chip packages for TI
• 17．User guide for Easy5509 DSP

1.6 packing list

• 1、Easy5509 DSP evaluation board 1
• 2、5V DC power adaptor 1
• 3、USB cable 1
• 4、RS232 cable
• 5、CD for soft and user guide
• 6、packing list paper