QLdsPIC3 Microchip 16bit PIC MCU Development Board kit Price buy introduction Info|Study-Dev-PIC-programmer-simulator

Microchip 16bit PIC MCU Development  Board study kit QLdsPIC3,PIC Microcontroller MCU Development Tool Board Program Learning Kit Microchip,QLdsPIC3 is PIC 16bit Microcontroller Development tool, by dspic30f6014a,pic24fj96ga008,dspic33fj128gp708

16bit pic mcu development board for dsPIC30F6014A PIC24FJ96GA008 dsPIC33FJ128GP708 etc. dsPIC30Fx , PIC24x, dsPIC33Fx.

The QLdsPIC3 development board is an experimental development board designed by QLS Electronic by integrating its main characteristic function module based on variety of 16-bit microcontroller DEMO boards home and aboard, the main circuit of which origins from the standard DEMO board and reference application circuit of MICROCHIP Co. The design of board resource is completely open which can be flexibly extended, is a good assistant for mass of engineers to deal with the 16-bit MICROCHIP microcontroller software and hardware design.

The QLdsPIC3 development board supports PIC24FJ96GA008 and other chips compatible with pin, and the chip module can be changed.

The QLdsPIC3 development board supports dsPIC30F6014A and other chips compatible with pin, and the chip module can be changed.

The QLdsPIC3 development board supports dsPIC33FJ128GP708 and other chips compatible with pin, and the chip module can be changed.

Preprogrammed dsPIC30F6014A Plug-in Module, VDD =5V, Crystal for 10Mhz, On each corner of the card there is one electrolytic capacitor for stable power supply.

Open modular design： All modules can be on/off controlled by DIP switch. Each module is designed to connect to I/O port of Microcontroller. Connection of module with any port of Microcontroller is conveniently achieved through dupont thread. Connection to preset port is available by using DIP switch without dupont thread. All I/O ports are open externally with output socket. Expansion is easily accomplished.

On-board simulation debugging and Programmer interface： direct connection to ICD2/ICD3/MCD2/PICKIT2

The master controller is in independent design and it’s easy to change.

1) Power supply module, Jump select VDD for 5V or 3.3V                       
2) Master controller chip module
3) ICSP Connect port,it  can connect icd2/icd3/mcd2/pickit2 for program or debug,                      
4) Master controller chip ICSP I/O Pin select.
5) Reset key-press                       
6) LED module
7) Key-press module              
8) A/D converter input module
9) DS18B20 digital thermometer module                       
10) Real time clock module by PCF8583
11) 16*2-character LCD
12) 16*2 LCD backlight potentiometer
13) 128*64- Graphic LCD
14) 128*64 LCD backlight potentiometert
15) SD/MMC card Read/Write Module
16) PS2 module
17) CAN bus module by mcp2551
18) RS232 module B
19) RS232 module A
20) RS-485 and RS-422 communication module by MAX489E
21) Ethernet module by ENC28J60

23) All pins are taken out on IDC10 connectors to make them available for further connections.

Sample with C30 Program sources code as below (using dsPIC30F6014):

• 8x LED
• RS232 Communication
• RS485 Communication
• Can Communication
• PS2
• Real time clock
• Si3000 Voiceband Codec
• DS1820
• MMCSD card Read/Write
• 128x64 GLCD
• 1602 LCD
• Key-press
• A/D converter

The packing includes

1. QLdsPIC3 DEVELOPMENT Board (Include one dsPIC30F6014A chip module,one 16*2 LCD,one 128*64 LCD)
2. RJ45 LAN Cable
3. RJ12 to RJ12 ICSP cable
4. Dupont thread expansion connection 20x wire
5. DC wall adapter(input: AC110-240V 50/60Hz, output: DC9V 1000mA)
6. CD-ROM (English version PDF User manual ,PCB Board Layout PDF,Schematic PDF , Sample code (C30) , MPLAB  IDE, Chip's Datasheet)